MultiCS Güncel MultiCS r100-rc36 Public Beta - Broken Arrow

TüRKMaSTeR

Administrator
Yönetici
Ofline
------- rebuilded skipcwc to fastest structs (rc36) --------

------- rebuilded smartfilter to fastest structs replaced with easy skip (rc36) --------

------- rebuilded dcw processing to minimalize bad dcw (rc36) --------

------- attention: some syntax changed and somem options obsolete as below (readme.txt) (rc36) --------

------- attention: check profile values regarding to DCW SKIPCWC: YES by new config file (rc36) ------
 

Ekli dosyalar

  • Multics-r100rc36-NotPublic-BrokenArrow_x64.zip
    302.9 KB · Görüntüleme: 107

razor123

Member
Ofline
those above is not public version

here is MultiCS r100-rc36 Public Beta - Broken Arrow MEGA CLEAN CACHE version

this version has very clean cache and no bad dcw

CHAHNGES FOR rc36:
------- rebuilded skipcwc to fastest structs (rc36) --------
------- rebuilded smartfilter to fastest structs replaced with easy skip (rc36) --------
------- rebuilded dcw processing to minimalize bad dcw (rc36) --------
------- attention: some syntax changed and somem options obsolete as below (rc36) --------
------- attention: check profile values regarding to DCW SKIPCWC: YES by new config file (rc36) --------

1.3.2.0
attention: changed syntax for skipcwc:
removed: ENABLE SKIPCWC: YES/NO

replaced with: DCW SKIPCWC: YES/NO

removed obsolete: (examples in config)
ECM_HEADER

replaced with: (headers with any length delimited with comma "," )

DCW ECM_HEADER_ACTIVE: YES
DCW ECM_HEADER_VALUES: 80308B078400,81308B078400

example for 09C4 now valid:

[SKYDE-09C4]
CAID: 09C4
PROVIDERS: 0
PORT: 17026
DCW SKIPCWC: YES
DCW HALFNULLED : YES
DCW CHECK: NO
SERVER THRESHOLD: 0
SERVER CACHE_THRESHOLD: 0
DCW ECM_HEADER_ACTIVE: YES
DCW ECM_HEADER_VALUES: 8170A400,8070A400
ECM CHECK LENGTH: YES
ECM LENGTH: A7

now possible to turn off cache_threshold for profiles by: (faster processing)
now not recommended to use cache threshold for profiles, rather ecm headers

CACHE_THRESHOLD_PROFILE ACTIVE: NO

removed obsolete SMARTFILTER: (now easy skipcwc used automatically - fastest)

SKIPCWC_CHECKSUM_TEST DISABLE_FIXED: YES

REJECT_BAD_DCW ON_SKIPCWC: NO

LOG_BAD_NDS_DCW ACTIVE: NO

SHOW_ONLY_BAD_NDS_DCW ACTIVE: NO

LOG_BAD_NDS_DCW TO_FILE: NO

NDS_SMARTFILTER THECM: 0
NDS_SMARTFILTER CLI_CCCAM: 0
NDS_SMARTFILTER CLI_RADEGAST: 0
NDS_SMARTFILTER SRV_NEWCAMD: 0
NDS_SMARTFILTER CLI_NEWCAMD: 0
NDS_SMARTFILTER SRV_CAMD35: 0
NDS_SMARTFILTER CLI_CAMD35_CACHEEX: 0
NDS_SMARTFILTER SRV_CS378X: 0
NDS_SMARTFILTER SRV_CCCAM: 0
NDS_SMARTFILTER CLI_CS378X: 0
NDS_SMARTFILTER SRV_MGCAMD: 0
NDS_SMARTFILTER CLI_CCCAM_CACHEEX: 0
NDS_SMARTFILTER CLI_CS378X_CACHEEX: 0
NDS_SMARTFILTER CLI_CAMD35: 0
NDS_SMARTFILTER CLI_CACHE: 0

removed after testing with bad results also options:

REJECT_NDS_DCW_OLDER_VERSIONS ACTIVE: NO
REJECT_NDS_DCW_OLDER_VERSIONS LOG: NO

REJECT_SKIPCWC_OLDER ACTIVE: NO
REJECT_SKIPCWC_OLDER LOG: NO

REJECT_CAK7_OLDER ACTIVE: NO
REJECT_CAK7_OLDER LOG: NO

removed obsolete fast_accpet, now automatically processed:

FAST_SKIPCWC_CAIDS ACTIVE: NO
FAST_SKIPCWC_CAIDS VALUES: 0500,1811,FFFF,1863

changed in example config DCW SKIPCWC: NO for caid 0500:050F00 (there are good cheksum ok dcw processed, by testing)

only for manual install as needed to modify config values


.
sifone.gif

.
.
.
 

Ekli dosyalar

  • Multics-r100rc36-PubBeta-BrokenArrow_x64.zip
    282.3 KB · Görüntüleme: 123

E-Sat

Well-known member
Ofline
Hi
Errore nella chiamata
error while loading shared libraries: libcrypto.so.1.1


(the same way also for ubuntu)

start from this point : (or use lib files attached in zip file)

curl -O -L

if all is installed , on old systems , find libssl.so.1.1 and libcrypto.so.1.1 (it would be in dir: /usr/local/openssl ) and copy them to:
/lib
/lib32
/lib64

than restart multics , it should fix this problem
 

sami1349

New member
Ofline
(the same way also for ubuntu)

start from this point: (or use lib files attached in zip file)

curl -O -L

if all is installed, on old systems, find libssl.so.1.1 and libcrypto.so.1.1 (it would be in dir: / usr / local / openssl) and copy them to:
/ lib
/ lib32
/ lib64

than restart multics, it should fix this problem
Tnx Dear Bro 🙏🙏🙏
 

gbox_men

New member
Ofline
not worc profile not open ,please help?

[MAXTV / HD+]
CAID: 1830
PROVIDERS: 0
PORT: 17012
ECM CHECK LENGTH: NO
#ECM LENGTH: 92
DCW CHECK: NO
SERVER THRESHOLD: 0
SERVER CACHE_THRESHOLD: 0
 

TüRKMaSTeR

Administrator
Yönetici
Ofline
not worc profile not open ,please help?

[MAXTV / HD+]
CAID: 1830
PROVIDERS: 0
PORT: 17012
ECM CHECK LENGTH: NO
#ECM LENGTH: 92
DCW CHECK: NO
SERVER THRESHOLD: 0
SERVER CACHE_THRESHOLD: 0
[MAXTV]
CAID: 1830
PROVIDERS: 0,aa80,aa81
PORT: +
#ECM CHECK LENGTH: NO
#ECM LENGTH: 8E

Use this config.
 

gbox_men

New member
Ofline
##########################################################
## PROFILES DEFAULT VALUES
##########################################################
DEFAULT KEY: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
DEFAULT DCW MAXFAILED: 0
DEFAULT SERVER FIRST: 0
DEFAULT SERVER MAX: 0
DEFAULT SERVER THRESHOLD: 0
DEFAULT DCW TIMEOUT: 5500
DEFAULT CACHE TIMEOUT: 175
DEFAULT SERVER INTERVAL: 500
DEFAULT SERVER TIMEOUT: 1000
DEFAULT CACHE VALIDECMTIME: 0
DEFAULT CACHEEX VALIDECMTIME: 0
DEFAULT SERVER VALIDECMTIME: 7000
DEFAULT DCW RETRY: 0
DEFAULT RETRY NEWCAMD: 0
DEFAULT RETRY CCCAM: 0
DEFAULT DCW CHECK: NO
DEFAULT ECM CHECK LENGTH: NO
DEFAULT CACHE SENDREQ: YES
DEFAULT CACHE RESENDREQ: YES
DEFAULT CACHE SENDREP: YES
DEFAULT CACHEEX MAXHOP: 2
DEFAULT ENABLE CCCAM: YES
DEFAULT ENABLE MGCAMD: YES
DEFAULT ENABLE NEWCAMD: YES
DEFAULT ENABLE CACHE: YES
DEFAULT ENABLE CACHEEX: YES
DEFAULT ACCEPT NULL SID: NO
DEFAULT ACCEPT NULL CAID: YES
DEFAULT ACCEPT NULL PROVIDER: YES
DEFAULT CACHE STATIC: YES
UPDATE ONCHANGE: YES
LOGLEVEL: 4 # DEBUG

[MAXTV / HD+]
CAID: 1830
PORT: 17012
PROVIDERS: 0,aa80,aa81
#ECM CHECK LENGTH: NO
#ECM LENGTH: 92
#DCW CHECK: NO
#SERVER THRESHOLD: 0
#SERVER CACHE_THRESHOLD: 0

mistic not worc profile ,please help
 

gbox_men

New member
Ofline
I find problem,profile is ok
my problem:
#CCCAM PROFILES: 17000,17001,17002,17003,17004,17007,17008,17009,17013,17016,17019,17020,17022,17023,17025,17026,17027,17028,17029,17032,17033,17036,17037,17039,17040,17043,17045,17046,17047,17081,17082,17083,17085,17086,17087,17091,17100,17103,17107
I must bloc CCCAM PROFILES
 

gm998

Active member
Ofline
Not Installing This Version ...............

ERROR...........error while loading shared libraries: libcrypto.so.1.1
 

E-Sat

Well-known member
Ofline
Not Installing This Version ...............

ERROR...........error while loading shared libraries: libcrypto.so.1.1
first try:
ubuntu:

(only higher and >= 16.04 , older version issue GLIBC, also for compiled libcrypto.so.1.1 and libssl.so.1.1)

apt update
apt install openssl
 

E-Sat

Well-known member
Ofline
i have Ubuntu 18 & 20

not working this version ...........

libgomp issue : if you will find message like this :
error while loading shared libraries: libgomp.so.1: cannot open shared object file: No such file or directory

it's needed to install libgomp1 libraries:

how to ubuntu:

apt install libgomp1
 

gbox_men

New member
Ofline
I have problem, CPU usage 109

Loadaverage restart percent value: 700

Pid: 8076

Bin name: multicsr100

Cpu usage: 109.00

Threads used: 28

All system threads: 211

Cpu's cores: 2

MAX_CSPORTS tunning: no : 200

SHARELIMITS tunning: no : 50

CACHE_VALUE tunning: no : 150

Please hellp?
 
Üst